Description

Wavlink AC600 7dBi High Power Outdoor Omni-directional Access Point/CPE/Repeater/WISP 2.4GHz 150Mbps + 5GHz 433Mbps, Passive PoE Model Features: ✅【Withstand Harsh Outdoor Climates】 - IP65-rated weatherproof housing that ensures continued operation in harsh outdoor environments or in climates of extreme cold, heat or continuous moisture; Robust weatherproof case withstands harsh outdoor conditions; Withstanding broad ranges of humidity and temperature (-30°C~70°C) (-22°F~158°F); 15KV ESD, 4KV lightning protection, ensure stable connection in harsh outdoor conditions ✅【Dual Band Outdoor Wi-Fi Extender】 - This WiFi Signal Booster comes with next generation 802.11AC Wi-Fi technology, dual band external antennas provides up to 2.4GHz 150Mbps and 5GHz 433Mbps. Resolve the problem with a weak signal in an excellent manner, help to boost WiFi signal strength.The WAN port support 100Mbps. ✅【Multi Operation Modes】 - The Outdoor Wi-Fi Access Point has integrated Power over Ethernet (PoE) support, allowing it to be installed in areas where power outlets are not readily available by combing your power and network data connection into a single RJ-45 cable. It supports wireless Repeater, Router, and Access Point (AP) mode.You can switch between these 3 modes.If you have any question,please contact us to download the new firmware or we will full refund for you or resend new item for you. ✅【Built-in High Power Amplifiers】 - High Power Amplifiers PA+LNA 600mW and enhanced receiver design increase transmission power up to 5x . More strong penetration & longer range coverage than the general access point, ideal for providing Wi-Fi service in big area such as factory, community, street or etc ✅【2 x 7dBi Detachable Omni Directional Antennas】 - Feature 2 x RP-SMA connectors for external antennas, and higher antenna gain extensively strengthens Wi-Fi signal and expands wider coverage in the open air, stability technology automatically avoids channel conflicts using its channel selection feature, meet outdoor long range coverage wireless network requirement, cover hard-to-reach dead zones ✅【Power Over Ethernet 】 -This Outdoor Wi-Fi Access Point has integrated PoE support, it to be installed in areas where power outlets are not readily available by combing your power and network data connection into a single RJ-45 cable. Note: All Wi-Fi extenders are designed to increase or improve Wi-Fi coverage, not to directly increase speed. In some cases improving signal reliability can affect overall throughput. Wavlink Brings Technology to Life WN570HA1 is designed to provide WISP, CPE solutions and long-range wireless network solution for video surveillance and transmission. With two omni-directional 7dBi dual-polarized antennas and strong transmit power of up to 1000mW, it provides a compelling performance solution for small and growing business at a very affordable price and also provides an efficient way to pick up and maintain a stable signal for a wireless network connection from long distance. Withstand harsh climates WN570HA1 has an IP65-rated weatherproof housing that ensures continued operation on harsh outdoor environments or in climates of extreme cold, heat or continuous moisture. Note: The PoE part of the router is not waterproof. Easy Installation With Power over Ethernet(PoE) By combing your power and data connection into a single cable, PoE simplifies the setup of the High power Outdoor WiFi Access Point/Bridge. Combining power and network access into a single RJ-45 connection for the WN570HA1 allow you to install the WN570HA1 in hard to reach location without worrying about running both power and Ethernet cables. How Does It Work? 1.Slide the straps through the slots on the back of the AP/Router and tighten the straps around the hole. 2.Connect one end of an LAN cable to the PoE port of the provided Power injector and the other end of the LAN cable to the LAN port of the AP/Router. 3.Use another LAN cable to connect the LAN port of the power supply. 4.Plug the power adapter into a wall socket. Specifications: 1.Operating Temperature: -30°C~70°C(-22 ~158F) 2.Storage Temperature: -40°C~70°C(-40~158F) 3.Power Plug: US 4.Voltage: 100-240V 5.Support 2.4 GHz 5GHz 6.Standard:802.11 ac/a/b/g/n 7.Maximum WLAN security with WPA2,WPA and WEP(128/64) 8.Distance:Outdoor 150m(Change with the Actual Environment) What’s in the package? 1 x WiFi AP/Router 2 x Antenna 1 x power Adapter 1 x POE Converter 1 x RJ-45 Networking Cable 1 x Main body holder 1 x Screw fitting 2 x Cable ties 1 x Quick Installation Guide Note: Select the wireless network with a signal strength greater than 70% to get the most reliable connection. The outdoor antenna should be installed at a height of 2 meters above the roof or in a high open place for better reception